|
|
|
|
Description:
|
nMtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier for the associated network interfaces object
within MIB-II.
This object shall be a copy of ifIndex (actually Textual
Convention InterfaceIndex - see below from IF-MIB) from
RFC1213-MIB (MIB-II) (1.3.6.1.2.1.2.2.1.1) so as to provide
a link between this network measurement block and the
network interface it is associated with.
If ifIndex is not used within the unit, then an equivalent
number to identify the interface should be used.
This shall be greater than zero.
(Description of ifIndex from RFC1213-MIB).
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber (1.3.6.1.2.1.2.1).
The value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.
(Note about and Description of Textual Convention
InterfaceIndex from IF-MIB).
InterfaceIndex contains the semantics of ifIndex and
should be used for any objects defined in other MIB modules
that need these semantics.
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
|
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
