|
|
Description:
|
cfrExtCircuitMapStatus OBJECT-TYPE
SYNTAX INTEGER (0..2047)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise, the value is a sum. It initially takes
the value zero, then, for each type of Protocol,
2 raised to a power is added to the sum.
The following table presents respective power and
equivalent value for each applicable type:
Protocol Power Value
-------- ----- -----
IP 0 1
IPX 1 2
Appletalk 2 4
XNS 3 8
VINES 4 16
DECnet 5 32
CLNS 6 64
Bridging 7 128
RSRB 8 256
STUN 9 512
LLC2 10 1024
For example, value 3 means the circuit's mapping
protocols include IP and IPX. (3 = 2**1 + 2**0,
where 0 corresponds to IP and 1 to IPX.) Value 0
means there is currently no mapping protocol for
the circuit.
See cfrMapTable for more mapping information."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |