|
|
|
|
Description:
|
sysAttachType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
dualAttach(2), -- port 1 is A and port 2 is B
singleAttach(3),-- port 1 is S and port 2 is M
nullAttach(4), -- port 1 is M and port 2 is M
dualPrio(5) -- dual attach priority mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The requested concentrator attachment type. For a
dual attachment concentrator which can be
connected to the trunk ring, the first FDDI port
is configured as A and the second FDDI port is
configured as B.
For a single attachment concentrator which can be
connected beneath another concentrator, the first
FDDI port is configured as M and the second FDDI
port is configured as S. For a null attachment
concentrator which can be located at the root of
the tree, the first two FDDI ports are configured
as M.
This object does not take effect until the
concentrator is reset. The current attachment
type can be determined from snmpFddiPORTPCType
for ports 1 and 2."
DEFVAL { dualAttach }
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
