|
|
|
|
Description:
|
eocBrAutoConfig OBJECT-TYPE
SYNTAX INTEGER {disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Auto-Config function or not. While enabled, bridge will try to retrieve the Master and all connected EP config files from the designated Auto-Config directory 'eocBrAutoConfigTFTPExtensionPath' at server 'eocBrAutoConfigTFTPServer' via TFTP. Usually the 'Extension Path' and 'TFTP Server IP Address' are obtained during the DHCP client handshaking.
For example, power on the bridge, it will start DHCP client and get the Auto-Config TFTP related parameters. If the Auto-Config is ON, bridge then begins to retrieve the config files of Master/EP.
Setup Master/EP devices accordingly."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
