|
|
Description:
|
geModemStatus OBJECT-TYPE
SYNTAX NonNegativeInteger32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the modem, controlled by the addressed device.
The status word is a collection of bits, as specified below. The SNMP value NOSUCHNAME means 'status not (yet) available'.
1 modemStatOnline. There is a valid online connection.
2 modemStatError. The last operation has failed. The device
will clear this bit when a new modem command is received.
4 unused (should be defined = 0).
8 unused (should be defined = 0).
16 modemStatDialling. The dialling procedure is pending.
32 modemStatBusy. The device is performing some operation,
and can not be accessed, temporarily.
64 unused (should be defined = 0).
128 modemStatNoModem. The modem is not connected or not responding.
256 modemStatDCD. The DCD line status signal is on.
512 modemStatRing. The RING line status signal is on.
1024 modemStatCTS. The CTS line status signal is on.
2048 modemStatDSR. The DSR line status signal is on.
4096 unused (should be defined = 0).
8192 unused (should be defined = 0).
16384 unused (should be defined = 0).
32768 unused (should be defined = 0)."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |