|
|
Description:
|
rh1SelfTestExecuteSelfTest1 OBJECT-TYPE
SYNTAX INTEGER {
no-test(1),
test(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Causes the Rack to initiate the non-disruptive self-test
function. The hub performs a non-disruptive self-test that
has the following characteristics:
- The test changes neither the state of the hub nor
management information about the hub.
- The test does not inject packets onto any segment.
- The test does not prevent the relay of any packets.
Test results are conveyed by the hubHealth objects. Note,
the IEEE specification does not specify the components to be
tested."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |