|
|
|
|
Description:
|
nbsCmmcPortNominalBitRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This NominalBitRate variable exists for modules
which support configurable speeds that may not be listed in
PortSpeed. Here can be specified the raw bit rate desired,
measured in decimal Mbps.
The Agent may use exactly that rate, or may substitute it with
a compatible rate within an appropriate range of speeds.
If the Agent receives a request for a bitrate it cannot
support, it should return the SNMP errorstatus badValue(3).
For ports whose speed is unknown or not configurable, the
Agent should report this value as -1.
The reserved value 0 specifies that no speed is configured,
and any clocking is bypassed.
The following values are associated with specific protocols:
44 - DS3
51 - OC-1
77 - Telco bus
125 - Fast Ethernet (100 Mbps)
126 - FDDI
155 - OC-3
200 - ESCON
270 - SDI 270Mbps
540 - SDI 540Mbps
622 - OC-12
1063 - 1 Gig FibreChannel
1244 - OC-24
1250 - Gigabit Ethernet
1485 - HDTV
2125 - 2 Gig FibreChannel
2450 - OC-48
2500 - Infiniband
2666 - OC-48+FEC
9953 - 10 Gig Ethernet/WAN
10312 - 10 Gig Ethernet/LAN
10625 - 10 Gig FibreChannel
For ports that support ProtoAdmin 'userDefined', writing
this object will automatically set the ProtoAdmin to
'userDefined'."
DEFVAL {-1}
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
