|
|
Description:
|
mscVctDcUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains the user data, if present. userData is a 0 to 16
length string which is appended to the call request packet that is
presented to the called (destination) DTE.
User data can be a 0 to 128 byte string for fast select calls;
otherwise it is 0 to 16 byte string.
Fast select calls are indicated as such using the X.25 ITU-T facility
for 'Reverse Charging'.
The length of the user data attribute is not verified during service
provisioning. If more than 16 bytes of user data is specified on a
call without the fast select option, then the call is cleared with a
clear cause of 'local procedure error', and a diagnostic code of 39
(as defined in the ITU-T X.25 Recommendation)."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |