|
|
|
|
Description:
|
mscAtmIfVptTxQThreshTable OBJECT-TYPE
SYNTAX SEQUENCE OF MscAtmIfVptTxQThreshEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper.
This attribute indicates the queue limit and the discard thresholds for the transmit queue of this connection.
The first element indicates the queue limit. Depending upon the atmServiceCategory of the connection, the provisioned value of the transmit queue limit is derived from the txQueueLimit attribute under one of the subcomponents of the AtmIf CA component. If the connection has traffic shaping disabled, then this attribute relates to the common queue. If traffic shaping is enabled, then this attribute relates to the per-VC queue.
The second element is the threshold that marks the transition from congestion state 1 to congestion state 0. This is the threshold at which traffic with discard priority (DP) = 1 is discarded. This threshold is set approximately at 90 percent of the first parameter, the operational queue limit.
The third element is the threshold that marks the transition from congestion state 2 to congestion state 1. This is the threshold at which traffic with DP = 2 is discarded. This threshold is set approximately at 75 percent of the first parameter, the operational queue limit.
The fourth element is the threshold that marks the transition from congestion state 3 to congestion state 2. This is the threshold at which traffic with DP = 3 is discarded. This threshold is set approximately at 35 percent of the first parameter, the operational queue limit."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
mscAtmIfVptTxQThreshEntry(1) 
