|
|
|
|
Description:
|
zrgBatteryRelayStatus OBJECT-TYPE
SYNTAX BITS
{
normalMode(0),
batteryON(1),
batteryLOW(2),
batteryBAD(3),
batteryGone(4),
noUPS(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description.
The object describes the state of the ZRG board power supply.
The power may have one or two states from the following states:
normalMode(0) indicates that the load is receiving power from commercial power
batteryON(1) indicates that the load is receiving power from battery.
batteryLOW(2) indicates that the battery has been reduced to the point that
roughly 20% of the available runtime is available.
batteryBAD(3) indicates that the battery has failed it's periodic test. The
battery should be replaced as system availability has been compromised.
batteryGone(4) indicates that the battery is disconnected. Load will not be
supported if the commercial power fails.
noUPS(5) indicates that the UPS unit is disconnected. Load will not be
supported if the commercial power fails."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
