Description:
|
esafeErouterOperMode OBJECT-TYPE
SYNTAX INTEGER {disabled(1), ipv4OnlyFwding(2), ipv6OnlyFwding(3), ipv4AndIpv6Fwding(4), noIpv4AndNoIpv6Fwding(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides visibility to the current
mode of operation of the DOCSIS eRouter eSAFE
element of the eDOCSIS compliant device.
If the value of this object is disabled(1),
the eRouter eSAFE element has been administratively
Disabled. The eDOCSIS device will bridge traffic
according to the configuration of the DOCSIS
embedded cable modem (eCM)
If the value of this object is ipv4OnlyFwding(2),
the eRouter eSAFE element is currently operating
with the IPv4 protocol stack operational, is
forwarding IPv4 traffic, and is not running an
IPv6 protocol stack and not forwarding IPv6 traffic.
If the value of this object is ipv6OnlyFwding(3),
the eRouter eSAFE element is currently operating
with the IPv6 protocol stack operational, is
forwarding IPv6 traffic, and is not running an
IPv4 protocol stack and not forwarding IPv4 traffic.
If the value of this object is ipv4AndIpv6Fwding(4),
the eRouter eSAFE element is currently operating
with both the IPv4 protocol stack and IPv6 protocol
stack operational, and is forwarding IPv4 and IPv6
traffic.
If the value of this object is noIpv4AndNoIpv6Fwding(5),
the eRouter is currently operating with neither the IPv4
nor IPv6 protocol stack running. The eRouter is unable to
pass traffic between the Operator-Facing Interface and the
Customer-Facing Interface."
REFERENCE
"DOCSIS IPv4 and IPv6 eRouter Specification,
CM-SP-eRouter-I02-070223."
|
|