Description:
|
esafeEstbInitModeControl OBJECT-TYPE
SYNTAX INTEGER {ipv4Only(1), ipv6Only(2), ipv4AndIpv6(3), honorEstbInitMode(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides control over the initialization
mode of the DOCSIS eStb eSAFE element. Except
when set to honorEstbInitMode(4), the value of this
object MUST override all Initialization Mode and
Operation Mode encodings encapsulated in the eCM
configuration file, e.g., TLV 217.1.
This object can only be set via an SNMP management
Station. This object cannot be included in the eCM
configuration file.
When this object is set to ipv4Only(1), the eStb
is instructed to switch to IPv4 Protocol Enabled Mode.
When this object is set to ipv6Only(2), the eStb
is instructed to switch to IPv6 Protocol Enabled Mode.
When this object is set to ipv4AndIpv6(3), the eStb
is instructed to switch to Dual IP Protocol Enabled Mode.
When this object is set to honorEstbInitMode(4), the
eRouter is instructed to honor the eStb Initialization
Mode Encoding encapsulated in the eCM Config File under
TLV 217.
The value of this object MUST persist across cable modem
resets."
REFERENCE
"OpenCable Host Device 2.1 Core Functional Requirements
as specified in OC-SP-HOST2.1-CFR-I18-yymmdd."
|
|
iso(1)
