|
|
|
|
Description:
|
consoleApplyMode OBJECT-TYPE
SYNTAX INTEGER {applyAndSaveImmediately(1), saveManually(2), applyAndSaveManually(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this entry is set to '1' changes due
to 'set...' commands are immediately applied
to the switch and saved in the configuration.
If it is set to '2' changes are also applied
immediately but the changed configuration
will not be saved. If it is set to '3'
changes are neither applied to the switch
nor the configuration is saved.
Using the 'save settings' command at the
telnet console the configuration will be
applied and saved.
After a reset this value is always set to
the default value of 2 (saveManually)."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
