|
|
Description:
|
atmBrCfgDefaultTpFltOrder OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the order in which User Filters will
be applied to frames when the ATM LAN Bridge is operating
in transparent mode. The octet string should be read from
left to right. The left most byte reflecting the filter
type that will be applied to the frame first, the second
byte reflecting the filter type that will be applied to
the frame second, etc. Any zero value octet will be
ignored.
The following filter types are represented by the associated
numerical value and are appropriate for transparent bridges:
MAC Address 0x02
Ethernet Type 0x05
SSAP 0x06
The remaining bytes not used to specify a filter type should
be zeros.
The agent will not prevent a filter type from appearing more
than once in the filter order octet string. In this situation,
the filtering process will be applied twice for that filter type.
This is a benign, but useless, situation, so it should be avoided."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |