|
|
Description:
|
iomSnmpv3UserState OBJECT-TYPE
SYNTAX INTEGER {disabled(0), enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the state of the user: Enabled or Disabled.
The sequence of creating and enabling a user account or changing various OID<92>s
of the SNMPv3 user account will be as follows:
(1) Set the <91>iomSnmpv3UserState<92> to disabled.
(2) Configure all the appropriate v3 user account information and trap address objects.
(3) Set the <91>snmpv3UserState<92> to enabled. When the IOM receives a set to enable, the IOM is
responsible to validate that all the SNMPv3 user objects are valid to create a functioning v3 user
account. If they are not then the response to this set should fail as described in (4).
(4) If all objects have been set correctly the response to this object will be
<91>success<92> otherwise the response will indicate failure. Note: enforcing disabling
then enabling the user account will ensure no partial account will be configured in
the IOM SNMP agent."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |