Description:
|
swFCPortPhyState OBJECT-TYPE
SYNTAX INTEGER {
noCard (1),
noTransceiver (2),
laserFault (3),
noLight (4),
noSync (5),
inSync (6),
portFault (7),
diagFault (8),
lockRef (9),
validating (10),
invalidModule (11),
noSigDet (14),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noTransceiver(2) no Transceiver module in this port.
noGbic(2) was used previously. Transceiver
is the generic name for GBIC, SFP etc.;
laserFault(3) the module is signaling a laser fault
(defective Transceiver);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
Transceiver, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
validating(10) Validation is in progress
invalidModule(11) Invalid SFP
unknown(255) unknown."
|
|
iso(1)
