Description:
|
saCmMtaProvisioningMode OBJECT-TYPE
SYNTAX INTEGER {
packetCable(0),
oneConfigFile(1),
twoConfigFilesDHCP(2),
twoConfigFilesSNMP(3),
twoConfigFilesDHCPmacAddress(4),
twoConfigFilesMacAddressOnly(5),
webPage(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object must only be set via the CM configuration
file during the provisioning process.
After CM is operational, this object can not be set
via SNMP.
MTA provisioning modes:
0: MTA follows the PacketCable provisioning specifications
and supports BASIC, HYBRID and SECURE flows.
1: MTA will provision using only the CM config file. VoIP
parameters MUST be included in the CM config file as
VSIFs. This option will become obsolete.
2: MTA will learn the MTA config file name and location
from the MTA DHCP OFFER.
If the filename or location is missing, MTA will switch
to mode 3.
3: MTA will learn the MTA config file name and location via
SNMP. The MTA will send an SNMP inform to the
provisioning server specified in DHCP option 122.3 or
177.3, depending on saCmMtaDhcpPktcOption (note: MTA
will not provision if saCmMtaDhcpPktcOption = requireNone(1)
and no option 122.3 or 177.3 is specified).
4: MTA will learn the MTA config file name and location and
the MTA host name from the MTA DHCP OFFER/ACK.
If the filename is missing in the DHCP OFFER/ACK, the MTA
will request a config file name based on the MTA mac
address (example: 000f21c4e145.bin).
If the MTA host name is missing in the DHCP OFFER/ACK the
MTA will use a host name of MAC_ADDR (example: 000f21c4e145).
5: MTA will request a config file name based on the MTA mac
address (example: 000f21c4e145.bin).
MTA will learn the MTA config file location via DHCP.
MTA will use a host name of MAC_ADDR (example: 000f21c4e145).
MTA will NOT use the file name and host name in the
DHCP ACK even if the parameters are present.
6: Web page provisioning. Parameters from a web page will be used
rather than from config file. All the web page parameters are
stored in non-vol. Base provisioning method is 2 above.
For modes other than 0, MTA DHCP options 122, 177 are not required.
Note: This object can be set via the CM configuration file ONLY."
DEFVAL { 0 }
|
|
iso(1)
