|
|
Description:
|
mplsTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value SHOULD mimic the Extended Tunnel Id field in the SESSION object.
When the MPLS signalling protoocol is crldp(3) this value SHOULD mimic the Ingress LSR Router ID field in the LSPID TLV object."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), Internet Draft <draft-ietf-mpls-cr-ldp-06.txt>, November 2001"
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |