|
|
|
|
Description:
|
hpicfFfSpeedReduceTolerance OBJECT-TYPE
SYNTAX HpicfFaultTolerance
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tolerance level used to calculate the
speed reduction threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance, and
less than or equal to the corresponding instance
of hpicfFfDisablePortTolerance.
The agent will only reduce speed on a port if
auto-negotiation has been performed, and the
partners link abilities allow operation at a
slower media speed.
The agent will periodically check relevant
statistics for each port for each type of fault.
If the speed reduction threshold has been exceeded,
and speed reduction option is enabled for that
fault type, an hpicfFaultFinderTrap notification
will be sent. In addition, an entry will be made
in the hpicfFfLogTable for the fault.
The agent may elect not to reduce speed or
delay speed reduction of certain ports.
For example, it may choose to delay taking
action on a cascade port to give the cascaded
device a chance to correct the problem."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
