|
|
|
|
Description:
|
hpicfFfDisablePortTolerance OBJECT-TYPE
SYNTAX HpicfFaultTolerance
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tolerance level used to calculate the
port disable threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance.
The agent will periodically check relevant
statistics for each port for each type of fault.
If the port disable threshold has been exceeded,
and port disable is enabled for that fault type,
an hpicfFaultFinderTrap notification will be
sent. In addition, an entry will be made in the
hpicfFfLogTable for the fault.
Ports will not be disabled until at least one
polling interval after a warning has fired. In
addition, the agent may further delay disabling
a port in certain situations. For example, it
may choose to delay disabling a cascade port to
give the cascaded device a chance to correct the
problem."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
