|
|
Description:
|
mplsNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE
OBJECTS {mplsVpnVrfPerfCurrNumRoutes, mplsVpnVrfConfHighRouteThreshold}
STATUS current
DESCRIPTION
"This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value. The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
Note that mplsVpnVrfConfRouteMaxThreshTime denotes the interval at
which the the mplsNumVrfRouteMaxThreshExceeded notification will
be re-issued after the maximum value has been exceeded (or reached
if mplsVpnVrfConfMaxRoutes and mplsVpnVrfConfHighRouteThreshold
are equal) and the initial notification has been issued. Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared). Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsVpnVrfConfRouteMaxThreshTime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are continually
added and removed to/from a VRF after it has reached its maximum
value. The default value is 0. If this value is set to 0,
the agent should issue a notification whenever the maximum
threshold has been cleared."
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |