|
|
|
|
Description:
|
frwk802FilterEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..'ffff'h)
STATUS current
DESCRIPTION
"This object specifies the value that will be compared
against the value contained in the EtherType field of an
IEEE 802 frame. Example settings would include 'IP'
(0x0800), 'ARP' (0x0806) and 'IPX' (0x8137).
Setting the frwk802FilterEtherTypeMin object to -1 indicates
that EtherType data should not be considered during traffic
classification.
Note that the position of the EtherType field depends on
the underlying frame format. For Ethernet-II encapsulation,
the EtherType field follows the 802 MAC source address. For
802.2 LLC/SNAP encapsulation, the EtherType value follows
the Organization Code field in the 802.2 SNAP header. The
value that is tested with regard to this filter component
therefore depends on the data link layer frame format being
used. If this 802 filter component is active when there is
no EtherType field in a frame (e.g., 802.2 LLC), a match is
implied."
|
|
Information:
|
Automatically extracted from IETF RFC 3318.
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
