OID repository
OID Repository
http://oid-info.com
Display OID:
 
Action itemiso(1) Action itemidentified-organization(3) Action itemdod(6) Action iteminternet(1) Action itemmgmt(2) Action itemmib-2(1)  

Navigating the OID tree

g9982MIB(209)
child OIDs: Child OID separator g9982Objects(1) Child OID separator g9982Conformance(2) Child OID separator
 
Separation line
 
OID description

   
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

g9982MIB MODULE-IDENTITY
LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter: http://datatracker.ietf.org/wg/adslmib/charter/
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.
Petach-Tikva 4951169
Israel
Phone: +972-3-926-8421
EMail: menachemdodge1@gmail.com
Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 49103
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com
Editor: Moti Morgenstern
Postal: ECI Telecom
30 Hasivim St.
Petach-Tikva 4951169
Israel
Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com"
DESCRIPTION
"The objects in this MIB module are used to manage the Ethernet-based multi-pair bonded xDSL interfaces, as defined in Recommendation ITU-T G.998.2 (G.Bond/Ethernet).
This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies.
The following references are used throughout this MIB module:
[G.998.2] refers to: Recommendation ITU-T G.998.2: Ethernet-based multi-pair bonding, January 2005.
[G.998.2-Amd2] refers to: Recommendation ITU-T G.998.2 Amendment 2, December 2007.
[802.3] refers to: IEEE Std 802.3-2005: IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, December 2005.
[TR-159] refers to: Broadband Forum Technical Report: Management Framework for xDSL Bonding, December 2008.
Naming Conventions:
BACP - Bonding Aggregation Control Protocol
BCE - Bonding Channel Entity
BTU - Bonding Terminating Unit
BTU-C - Bonding Terminating Unit, CO side
BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sub-layer
HDLC - High-level Data Link Control
PTM-TC - Packet Transfer Mode Transmission Convergence (sub-layer)
SNR - Signal to Noise Ratio
TC - Transmission Convergence (sub-layer)
UAS - Unavailable Seconds
Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (license-info)."
REVISION "201302200000Z" -- 20 February 2013
DESCRIPTION "Initial version, published as RFC 6767."



Information:

Automatically extracted from IETF RFC 6767 with Errata 3589, 3590 applied.

 
Short URLs for this page:

Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024
Tree display Parent OID: mib-2(1) First child OID: g9982Objects(1) First sibling OID: reserved(0) Previous sibling OID: g9981MIB(208) Next sibling OID: g9983MIB(210) Last sibling OID: iptfsMIB(246)
Separation line
OID helper Webmaster Bullet 15 Oct 2020 Bullet Page top