Description:
|
pwCepModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that support
full CEP PW configuration through this MIB module."
MODULE -- this module
MANDATORY-GROUPS { pwCepGroup,
pwCepCfgGroup,
pwCepPerfCurrentGroup,
pwCepPerfIntervalGroup,
pwCepPerf1DayIntervalGroup
}
GROUP pwCepFractionalGroup
DESCRIPTION "This group is only mandatory for implementations
that support fractional SPE."
GROUP pwCepFractionalSts1Vc3Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional STS-1/VC-3."
GROUP pwCepFractionalVc4Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional VC-4."
GROUP pwCepSignalingGroup
DESCRIPTION "This group is only mandatory for implementations
that support the CEP PW signaling."
OBJECT pwCepType
SYNTAX INTEGER { spe(1) }
MIN-ACCESS read-only
DESCRIPTION "The support of the value vt(2) or fracSpe(3) is
optional. If either of these options are
supported, read-write access is not required."
OBJECT pwCepSonetPayloadLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only the default values (which are
based on the pwCepType)."
OBJECT pwCepCfgMinPktLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgEnableDBA
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgRtpHdrSuppress
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that do not support RTP header for CEP
connections."
OBJECT pwCepCfgConsecPktsInsync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgConsecMissingOutSync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgPktErrorPlayOutValue
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgMissingPktsToSes
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgSesToUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgSecsToExitUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgRowStatus
SYNTAX RowStatus { active(1), notInService(2),
notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait is not required."
OBJECT pwCepFracMode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracAsync
SYNTAX PwCepFracAsyncMap { other(1) }
MIN-ACCESS read-only
DESCRIPTION "Support for ds3(2) or e3(3) and read-write access
is not required if the implementations do not
support these options."
OBJECT pwCepFracVtgMap
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracEbm
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Mode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Ebm1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Ebm2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Ebm3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracRowStatus
SYNTAX RowStatus { active(1), notInService(2),
notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait is not required."
|
|
iso(1)
