Description:
|
scsiLuState OBJECT-TYPE
SYNTAX BITS {
dataLost(0),
dynamicReconfigurationInProgress(1),
exposed(2),
fractionallyExposed(3),
partiallyExposed(4),
protectedRebuild(5),
protectionDisabled(6),
rebuild(7),
recalculate(8),
spareInUse(9),
verifyInProgress(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the state of a logical unit and its
meaning according to the bit position:
0 Data lost: Within the logical unit data has been lost.
1 Dynamic reconfiguration in progress: The logical unit is
being reconfigured. In this state all data is still
protected.
2 Exposed: Within the logical unit data is not protected.
In this state all data is still valid; however, loss
of data or data availability is unavoidable in the
event of a failure.
3 Fractionally exposed: Within the logical unit part of
the data is not protected. In this state all data is
still valid; however, a failure may cause a loss of
data or a loss of data availability.
4 Partially exposed: Within the logical unit one or more
underlying storage devices have failed. In this state
all data is still protected.
5 Protected rebuild: The logical unit is in the process of
a rebuild operation. In this state all data is
protected.
6 Protection disabled: Within the logical unit the data
protection method has been disabled.
In this state all data is still valid; however,
loss of data or data availability is unavoidable
in the event of a failure.
7 Rebuild: The data protection method is in the process of
rebuilding data. In this state data is not protected.
8 Recalculate: The logical unit is in the process of a
recalculate operation.
9 Spare in use: Within the logical unit a storage device
in full or part is being used to store data. In this
state all data is still protected.
10 Verify in progress: Within the logical unit data is
being verified."
REFERENCE
"SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
6.3.1.8 REPORT STATES service action [SCC2]"
|
|