OID repository
OID Repository
http://oid-info.com
Display OID:
 
Action itemiso(1) Action itemidentified-organization(3) Action itemdod(6) Action iteminternet(1) Action itemmgmt(2) Action itemmib-2(1) Action itemtransmission(10) Action itemmplsStdMIB(166) Action itemmplsLsrStdMIB(2) Action itemmplsLsrConformance(2) Action itemmplsLsrCompliances(2)  

Navigating the OID tree

mplsLsrModuleReadOnlyCompliance(2)
 
Separation line
 
OID description

   
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

mplsLsrModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance requirement for implementations that only provide read-only support for MPLS-LSR-STD-MIB. Such devices can then be monitored but cannot be configured using this MIB module."
MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
MANDATORY-GROUPS {
ifGeneralInformationGroup, ifCounterDiscontinuityGroup}
MODULE -- This module
MANDATORY-GROUPS {
mplsInterfaceGroup, mplsInSegmentGroup, mplsOutSegmentGroup, mplsXCGroup, mplsPerfGroup}
GROUP mplsLabelStackGroup
DESCRIPTION "This group is only mandatory for LSRs that wish to support the modification of LSP label stacks."
GROUP mplsHCInSegmentPerfGroup
DESCRIPTION "This group is mandatory for those in-segment entries for which the object mplsInSegmentOutOctets wraps around too quickly based on the criteria specified in RFC 2863 for high-capacity counters."
GROUP mplsHCOutSegmentPerfGroup
DESCRIPTION "This group is mandatory for those out-segment entries for which the object mplsOutSegmentPerfOctets wraps around too quickly based on the criteria specified in RFC 2863 for high-capacity counters."
GROUP mplsLsrNotificationGroup
DESCRIPTION "This group is only mandatory for those implementations which can efficiently implement the notifications contained in this group."
-- mplsInSegmentTable
OBJECT mplsInSegmentLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsInSegmentLabelPtr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsInSegmentNPop
SYNTAX Integer32 (1)
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. This object SHOULD be set to 1 if it is read-only."
OBJECT mplsInSegmentAddrFamily
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. A value of other(0) should be supported because there may be cases where the agent may not know about or support any address
types."
OBJECT mplsInSegmentRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsInSegmentStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
-- mplsOutSegmentTable
OBJECT mplsOutSegmentInterface
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsOutSegmentPushTopLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsOutSegmentTopLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsOutSegmentTopLabelPtr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsOutSegmentNextHopAddrType
SYNTAX InetAddressType {unknown(0), ipv4(1), ipv6(2)}
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. Only unknown(0), ipv4(1) and ipv6(2) support is required."
OBJECT mplsOutSegmentNextHopAddr
SYNTAX InetAddress (SIZE(0|4|16))
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. An implementation is only required to support unknown(0), ipv4(1) and ipv6(2) sizes."
OBJECT mplsOutSegmentRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsOutSegmentStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
-- mplsXCTable
OBJECT mplsXCLabelStackIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsXCAdminStatus
MIN-ACCESS read-only
DESCRIPTION "Read only support is required."
OBJECT mplsXCRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsXCStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLabelStackLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLabelStackLabelPtr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLabelStackRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLabelStackStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."



Information:

Automatically extracted from IETF RFC 3813 with Errata 228 applied.

 
Short URLs for this page:

Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024
Parent OID: mplsLsrCompliances(2) First sibling OID: mplsLsrModuleFullCompliance(1) Previous sibling OID: mplsLsrModuleFullCompliance(1)
Separation line
OID helper Webmaster Bullet 14 May 2020 Bullet Page top