Description:
|
mplsLsrModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance statement for agents that provide full
support for MPLS-LSR-STD-MIB. Such devices can
then be monitored and also be configured using
this MIB module."
MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE -- This module.
MANDATORY-GROUPS {
mplsInterfaceGroup,
mplsInSegmentGroup,
mplsOutSegmentGroup,
mplsXCGroup,
mplsPerfGroup
}
GROUP mplsLabelStackGroup
DESCRIPTION "This group is only mandatory for LSRs that wish to
support the modification of LSP label stacks.
"
GROUP mplsHCInSegmentPerfGroup
DESCRIPTION "This group is mandatory for those in-segment entries
for which the object mplsInSegmentOutOctets wraps
around too quickly based on the criteria specified in
RFC 2863 for high-capacity counters.
"
GROUP mplsHCOutSegmentPerfGroup
DESCRIPTION "This group is mandatory for those out-segment entries
for which the object mplsOutSegmentPerfOctets wraps
around too quickly based on the criteria specified in
RFC 2863 for high-capacity counters.
"
GROUP mplsLsrNotificationGroup
DESCRIPTION "This group is only mandatory for those implementations
which can efficiently implement the notifications
contained in this group."
OBJECT mplsInSegmentRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is
not required."
OBJECT mplsOutSegmentNextHopAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required."
OBJECT mplsOutSegmentNextHopAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION "An implementation is only required to support
unknown(0), ipv4(1) and ipv6(2) sizes."
OBJECT mplsOutSegmentRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is not
required."
OBJECT mplsLabelStackRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is not
required."
OBJECT mplsXCRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is not
required."
|
|