|
|
|
|
Description:
|
msTTPSink MANAGED OBJECT CLASS
DERIVED FROM "Recommendation M.3100":trailTerminationPointSink;
CHARACTERIZED BY
"Recommendation X.721":administrativeStatePackage,
"Recommendation M.3100":createDeleteNotificationsPackage,
"Recommendation M.3100":stateChangeNotificationPackage,
"Recommendation M.3100":tmnCommunicationsAlarmInformationPackage,
msTTPPackage,
msTTPSinkPkg PACKAGE
BEHAVIOUR
msTTPSinkBehaviourPkg BEHAVIOUR
DEFINED AS
*This object class terminates a multiplex section trail, i.e. the processing and removal of the multiplex section overhead from the incoming signal.
When the excessiveBERMtceInhibit attribute is set to TRUE, AIS is not inserted downstream upon detection of excessive BER.
A communicationsAlarm notification shall be issued if an excessive bit error rate is detected. The probableCause parameter of the notification shall indicate excessive BER.
A communicationsAlarm notification shall be issued if a degraded signal is detected. The probableCause parameter of the notification shall indicate signal degrade.
A communicationsAlarm notification shall be issued if an MS alarm indication signal is detected. The probableCause parameter of the notification shall indicate AIS (Alarm Indication Signal).*
;;
ATTRIBUTES
excessiveBERMtceInhibit GET-REPLACE,
signalDegradeThreshold GET-REPLACE;
;;
|
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
itu-t(0)
