|
|
|
|
Description:
|
flexiblePriority ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.FlexiblePriority;
BEHAVIOUR flexiblePriorityBehaviour BEHAVIOUR DEFINED AS
"This attribute determines, if the signRouteNePart is used as current route.
The signRouteNePart instances with operational state = 'enabled' contained
in the same signRouteSetNePart are chosen in ascending order as current
routes (The lower the value, the higher the priority).
There are different behaviours for the handling of 'priority gaps' possible:
i) priorityGapAllowedBEHAVIOUR ii) priorityGapNotAllowedBehaviour:
In the latter case it is not possible, to have a priority value. If there is
a lower value, which is not used in one of the routes of the route set. E.g.
in case of deleting a signRouteNePart instance whose priority value is not
equal to the priority of at least one of the remaining signRouteNeParts
contained in the same signRouteSetNePart, the priority values of the
remaining instances have to be decremented by one (see also example in table below).
What kind of priority gap behaviour is performed by the switch is to be
derived from the combination of the values of the attributes vendorName and
version of the managedSwitchingElement.
This attribute is writable only together with the attribute priorityMode.";;
|
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
itu-t(0)
